1，基本要求Basic Requirement：
|
项目Items |
参数Parameter |
|
制袋宽度Bag making width |
80-180mm |
|
制袋长度Bag making length |
100-1200mm |
|
制袋速度Bag making speed |
60-160只/分钟*2 八折平口袋 60-130只/分钟*2 八折背心袋 60-160pcs/min*2 star sealing flat bag 60-130pcs/min*2 star sealing T-shirt bag |
|
最高线速度Max line speed of film |
80米/分钟80m/min |
|
制袋厚度Bag making thickness |
0.005-0.020mm 八折平口袋 0.006-0.025mm 八折背心袋 0.005-0.020mm star seal flat bag 0.005-0.025mm star seal T-shirt bag |
|
制袋形式Bag making methods |
连卷八折平口袋Rolling star sealing flat bag 连卷八折背心袋Rolling star sealing T-shirt bag |
|
收卷最大卷径 Max rewinding diameter |
70mm，带贴标状态 70mm ,with labeling 120mm,不带贴标状态 120mm,without labeling |
|
收卷最大换卷频率 Max rewinding roll change frequency |
一分钟12次，带贴标 12times/min with labeling 一分钟15次，不带贴标 15times/min without labeling |
2，JDSZ-300*2型全自动左右分开连卷八折背心袋制袋机参数：
The parameter of the Automatic Double- Line Rolling Star Sealing T-shirt Bag Making Machine
|
项目 Items |
参数Parameter |
|
主机部分Perforation and Sealing part: |
|
|
制袋机控制 Machine main controller |
PLC及配套触摸屏（7英寸）控制，24V电源为中国台湾台达开关电源（100w）。 PLC and touch screen (7 inches) control, 24V power supply is Taiwan Delta switching power supply (100w). |
|
主电机功率Power of main motor |
1.5kw 380V交流电机，非刹车电机，维修方便。 1.5kw AC motor (external 15N.M, DC99V brake) non-brake motor, easy maintenance, including reduction gearbox |
|
主机控制Main motor controller |
1.5kw 汇川变频控制 1.5kw inovance inverter controller |
|
制袋长度控制Bag making length controller |
3w台达伺服系统*2 3kw Delta Servo motor*2 |
|
刀模部分 |
1. 八折平口点段刀模一副 2. 八折连背刀模一副，左右分开式。优点，左右刀模可以独立调节，把手拉力好，深度165mm 1. One set of star seal flat perforation knife mold 2. One set of star seal T-shirt bag knife mold, left and right is separated. Advantages: left and right knife mold can be adjusted independently, tension of handle is good.Depth is 165mm |
|
印刷跟踪Photoelectric tracking |
选配，日本松下 Optional,Panasonic from Japan |
|
温控区间Temperature control zone |
中国厦门德电温控仪，8区，固态加温，配3米长E分度，M8螺钉热电偶，含上下限报警功能。 XMDED temperate controller,8 zones ,Solid state heating,with 3m length E index,M8 screw thermocouple,with High and low temperature alarm function. |
|
温控精度Temperature control precision |
±1℃ |
|
加温总功率Total heating power |
铜刀加热棒上加温功率1.2kw（220V）*2，长度300mm，直径16mm。底加温加热棒500w*2，长度150mm,直径12mm Copper knife heating rod upper heating power 1.2kw（220V）*2,length 300mm,diameter 16mm. Lower heating power 500W*2,length 150mm,diameter 12mm. |
|
放料部分：Unwinding part |
|
|
主动放料Initiative feeding film |
550w卧式交流电机*2 550wHorizontal AC motor *2 |
|
主动放料电机控制 Initiative feeding motor controller |
0.75kw汇川变频控制*2,直线电位器调节速度（模拟量） 0.75kw Inovance inverter controller*2, linear potentiometer adjustment speed (analog) |
|
上料方式 Type of film feeding frame |
气缸上料，100*250mm气缸二只,手转阀控制。 Cylinder feeding, 100*250mm cylinder 2 pcs,hand turn valve control |
|
被动放料 Passive Film feeding motor |
550w卧式交流电机*2 550w Horizontal AC motor*2 |
|
被动放料电机控制 Passive Film feeding motor controller |
0.75kw汇川变频控制*2，台湾阳明接近开关调节速度 0.75kw Inovance inverter controller *2,Taiwan FOTEK proximity switch to control the speed |
|
对折架 Triangle device |
2套 2 sets |
|
自动纠偏 EPC |
2套 2 sets |
|
收卷部分：Rewinding part |
|
|
自动纠偏装置 Automatic correction device |
2套自动纠偏，滚筒300mm宽度 2 sets automatic correction device，width 300mm |
|
收卷控制系统Rewinding controller |
台达PLC及配套触摸屏（7英寸）控制，24V电源为台湾台达开关电源（100w） Delta PLC and touch screen (7 inches) control, Taiwan Delta 24V switching power supply (100w) |
|
收卷电机Rewinding motor power |
550w交流电机四只 550w AC motor*4 |
|
翻盘控制 Change the volume controller |
750W台达伺服+行星减速机*2，翻盘左右分开，独立计数。 0.75KW Delta servo motor+Planetary reducer, comeback left and right separate, independent counting. |
|
设备电气配置 Electric parameter： |
|
|
接触器品牌：法国施耐德 Contactor :Schneider from France |
中间继电器品牌：法国施耐德 Intermediate relay brand:Schneider from France |
|
电磁阀及气缸品牌：中国台湾新洋气动及韩国YSC Electromagnetic valve and air cylinder brand:Xinyang from China Taiwan and YSC from Korea |
轴承品牌：日本NSK Bearing brand:NSK from Japan |
|
光电品牌：日本松下 Sensor brand:Panasonic from Japan |
接近开关品牌：中国台湾阳明 FOTEK from China Taiwan |
|
整机功率Total power |
约18kw |
|
实际耗电量 Actual power consumption |
约5kw.h |
|
整机重量Total weight |
4000kg |
|
整机尺寸Overall size |
7200*2200*1800mm（长*宽*高） |
基本要求
Basic Requirement:
|
项目Items |
参数Parameter |
|
制袋宽度Bag making width |
120-350mm |
|
制袋长度Bag making length |
100-600mm |
|
制袋速度Bag making speed |
连卷平口袋60-350只/分钟 Rolling flat bag:60-350pcs/min |
|
最高线速度Max line speed of film |
120米/分钟m/min 120m/min |
|
制袋厚度Bag making thickness |
0.005-0.02mm |
|
制袋形式Bag making methods |
连卷平口袋Rolling flat vegetable bag |
|
|
|
2.技术参数：
Technical parameter:
|
项目 Items |
参数Parameter |
|
主机部分Main parts： |
|
|
制袋机控制 Machine main controller |
台达PLC及配套触摸屏（7英寸）控制*2，24V电源为台湾台达开关电源。 Delta PLC and touch screen (7 inches) control*2, 24V power supply is Taiwan Delta switching power supply (100w). |
|
主电机功率Power of main motor |
2.kw交流电机（外接15N.M,DC99V刹车）非刹车电机*维修方便，带减速箱 1.5kw AC motor (external 15N.M, DC99V brake) non-brake motor*2, easy maintenance, including reduction gearbox |
|
主机控制Main motor controller |
2.2kw三相380v台达变频控制 2.2kw 3Phase Delta inverter controller |
|
制袋长度控制 Bag making length controller |
3kw台达伺服Servo motor 2套，皮辊直径70mm，长度450mm,聚氨酯胶辊 3KW Delta Servo motor*4, roller diameter 70mm, length 500mm，polyurethane roller |
|
跟踪光电Photoelectric tracking |
无，选配 Optional |
|
温控区间 Temperature control zone |
4区，固态加温，含高低温报警自动停机功能。 4 zones ,with High and low temperature alarm function. |
|
温控精度 Temperature control precision |
±1℃ |
|
加温总功率Total heating power |
铜刀加热棒功率1.5kw（220V），长度450mm，直径16mm。铜刀长度450mm Sealing bar: 1.5kw (220V) for each, length450mm, diameter is 16mm. Copper knife length is 450mm |
|
刀模 Cutting knife |
平口刀模1套 Flat bag knife one set. |
|
放料部分Feeding film parts： |
|
|
主动放料Initiative feeding film |
550w铝壳减速电机，速比5 550w aluminum shell geared motors with a speed ratio of 5. |
|
主动放料电机控制 Initiative feeding motor controller |
0.75k台达变频控制直线电位器调节速度（模拟量） 0.75kw Delta inverter controller, linear potentiometer adjustment speed (analog) |
|
断料停机控制 Stop machine of film finished |
日本松下对射光电（黑色薄膜有效),40*20mm薄型气缸压料* Japan Panasonic correlation photoelectric(black film effective).40*20mm thin type cylinder |
|
上料方式 Type of film feeding frame |
气缸上料，100*250mm，手转阀控制。 Cylinder feeding,pcs 100*250mm cylinder,hand turn valve control |
|
被动放料 Passive Film feeding motor |
550w交流电机 550w AC motor |
|
被动放料电机控制 Passive Film feeding motor control |
0.75kw 380V 台达变频控制，阳明接近开关调节速度（开关量） 0.75kw 380v Delta inverter controller ,Fotek proximity switch to adjust the speed |
|
牵引部分Traction parts： |
|
|
牵引电机功率 Traction motor power |
550w卧式交流电机 550w Horizontal AC motor |
|
牵引电机控制 Traction motor control |
0.75kw台达变频控制，日本松下光电开关调节速度 0.75kw Delta inverter,Panasonic photoelectric switch control |
|
特殊配置 Special device |
自动纠偏 Automatic correction device |
|
收卷部分Rewinding parts： |
|
|
收卷控制Rewinding controller |
台达PLC及配套触摸屏（7英寸）控制，24V电源为台湾台达开关电源（100w） Delta PLC and touch screen (7 inches) control, Taiwan Delta 24V switching power supply (100w) |
|
收卷电机Rewinding motor power |
750W台达伺服电机4套750W Delta Servo motor*4 |
|
收卷电机控制 Rewinding motor controller |
750W台达伺服系统 750W Delta servo motor system |
|
翻盘控制 Change the volume controller |
750W台达伺服+行星减速机*2，翻盘左右分开，独立计数。 750W Delta servo motor+Planetary reducer, comeback left and right separate, independent counting. |
|
报警灯 Alarm light |
红，黄，绿三色报警灯，含蜂鸣器。 Red, yellow and green three-color warning lights with buzzer. |
|
整机功率Total power |
约about21kw |
|
实际耗电量 Actual power consumption |
约4kw.h About 4kw.h |
|
整机重量Total weight |
4500kg |
|
整机尺寸Overall size |
7200*2400*1800mm（长*宽*高）(L*W*H) |
电气配置Main Electrical configuration:
|
项目Items |
参数Parameter |
|
PLC品牌 PLC brand |
台湾台达 Delta from Taiwan |
|
触摸屏品牌 Touch Screen brand |
台湾台达 Delta from Taiwan |
|
变频品牌 Inverter brand |
台湾台达 Delta from Taiwan |
|
电机品牌 Motor brand |
芜湖德力 WUHU DELI |
|
伺服系统品牌 Servo motor system brand |
台湾台达 Delta from Taiwan |
|
接触器品牌 Contact brand |
法国施耐德 Schneider from France |
|
中间继电器品牌 Intermediate relay brand |
法国施耐德 Schneider from France |
|
按钮品牌 Button brand |
中国 Made in China |
|
放料光电品牌 Feeding photoelectric brand |
日本松下 Panasonic from Japan |
|
跟踪光电品牌 Tracking photoelectric brand |
日本松下 Panasonic from Japan |
|
开关电源品牌 Switching power brand |
中国台湾台达 Delta from China Taiwan |
|
冷却风机品牌 Cooling fan brand |
中国台湾台达 Delta from China Taiwan |
|
温控仪品牌 Temperature controller brand |
中国台湾台达 Delta from China Taiwan |
|
接近开关品牌 Proximity switch brand |
中国台湾阳明 FOTEK from China Taiwan |
|
电磁阀品牌 Electromagnetic valve brand |
韩国YCS YCS from Korea |
|
气缸品牌 Cylinder brand |
中国台湾新洋气动Xinyang from China Taiwan |
|
精密调压阀及旋转接头品牌 Precision pressure regulating valve and rotary joint brand |
日本SMC SMC from Japan |
|
油水分离器品牌 Oil-water separator brand |
日本SMC SMC from Japan |
|
收卷部分整套气动元件 Rewinding parts whole set of pneumatic Components |
日本SMC/韩国YCS SMC from Japan/YCS from Korea |
